A modular, highly automated mobile fluid transfer equipment. 【Processing capacity】: The flow rate ≤2333 m³/h 【Scope of application】: It can be widely used in mineral processing, water conservancy and hydropower, construction, sand processing, environmental protection and other industries.
The mobile pumping station has simple structure, convenient operation and maintenance, small footprint and flexible movement;
The wear-resistant slurry pump (water pump) used in the pump station is reliable and durable, and is suitable for pumping a variety of slurries composed of different particle sizes;
The motor of the pump station can realize variable frequency speed regulation to ensure that the pump works at a reasonable working point, and it can also be replaced by an internal combustion engine as the power;
The water ring vacuum pump unit of the pump station can automatically control the start and stop according to the signal of the liquid level gauge, to ensure that the slurry pump ensures that there is no air in the inlet pipeline and pump cavity before suction, and avoids the occurrence of cavitation;
The inlet and outlet of the pump are equipped with pressure sensors to detect pressure changes in real time;
The water inlet pipeline adopts electric rapid lifting or lowering, no additional lifting equipment is required, and the operation is more convenient;
The water ring vacuum pump can realize the recycling of working fluid, which greatly reduces the demand for working fluid and facilitates outdoor mobile operations;
The water ring vacuum pump adopts the form of mechanical seal, which has the characteristics of reliable structure, less leakage, less frictional power loss and long life, and the bearing is maintenance-free and does not need to add lubricating oil;
The inlet tee, outlet transition joint and outlet reducing joint are lined with Xinhai wear-resistant rubber, which greatly increases the service life of the pipeline;
The pump seal adopts a combination of auxiliary impeller and packing seal to ensure that the packing seal does not need to provide additional clean water source, which greatly reduces the consumption of clean water and reduces the burden on customers;
Xinhai can provide customers with a complete set of pumping station solutions and provide customers with high-quality technical support.
The vacuum drainage system is a drainage system assisted by a vacuum pump.The vacuum drainage system is divided into two parts: one is the water supply pump and pipeline; Another part is the vacuum pump, air-water separator and auxiliary pipeline.
The vacuum system can realize the functions of vacuum pumping and vacuum holding, solve the exhaust and drainage procedure before the pump starts, and realize the starting of the water supply pump conveniently, momentarily and fast. The vacuum pump and auxiliary pipeline are composed of a vacuum pump,gas-water separator, gas-water separator filling water pipeline, control cabinet, connecting pipeline and instrument valve. Before starting the feed pump, the gas in the inlet pipe, feed pump and outlet pipe are extracted through the exhaust outlet of the water pump. The gas enters the vacuum pump firstly, then enters the gas-water separator under the action of the vacuum pump, and finally is discharged into the atmosphere. After the water diversion is completed, the feed pump can be started at any time. During the operation,start the vacuum pump when the vacuum degree is lower than the minimum value,and stop it after the vacuum degree is pumping to the highest value.
| Model of mobile pump station | Flow rate (m3/h) | Head(m) | Rotate speed(rpm) | Model of slurry pump | Model of vacuum pump |
| YB-50 | 12-111 | 7.7-110.7 | 700-1480 | 50ZJ-I | 2BVA2060 |
| YB-80 | 43-242 | 8-109.8 | 700-1480 | 80ZJ-I | 2BVA2070 |
| YB-100 | 56-360 | 8.2-100.2 | 700-1480 | 100ZJ-I | 2BVA2070 |
| YB-150 | 95-550 | 8.7-100.2 | 700-1480 | 150ZJ-I | 2BVA2070 |
| YB-200 | 199-978 | 13-133.7 | 490-980 | 200ZJ-I | 2BVA5110 |
| YB-250 | 276-1573 | 13.1-133.7 | 490-980 | 250ZJ-I | 2BVA5110 |
| YB-300 | 395-2333 | 9.7-79.9 | 400-590 | 300ZJ-I | 2BVA5110 |
In a tailings project in Uzbekistan, Xinhai Mining has equipped a mobile pumping station system for the tailings pond pumping back water. The mobile pump station can automatically monitor the running status of the equipment, automatically control the start and stop of the equipment, and is flexible and convenient to move, and overcomes the problems of manual monitoring and control of the start and stop of the pump, which is time-consuming and laborious, and the cumbersome and inflexible fixed pump station.
+86 18733132385
